How to use optical, coaxial modes in K17?

Coaxial/optical decoding: optical/coaxial signal input to K17, decoding completed on K17, then output analog signals.

1.Rotate the menu knob and switch the working mode to coaxial/optical input modes.

2.Input connection: access to the corresponding coaxial/optical input on the rear panel

3.K17 output setting: switch to the corresponding output port according to the interface used, switch to [PO] or[PO+PRE]for the front panel, switch to[PO+PRE], [PRE] or [LO] for the rear panel.

Note:

1.At this time optical and coaxial output can also be achieved.

2.When connecting to FiiO Players via coaxial connection, remember to use the correct coaxial cable and switch the output mode to SPDIF(D2P) first.

Coaxial/optical output: K17 output coaxial/optical digital signals to third-party decoding devices, decoding completed on the third-party decoding devices.

1. In Bluetooth, USB, optical, coaxial, streaming, local playback modes, optical/coaxial output port have signal output.

2. In line input, balanced input modes,coaxial and optical outputs are not supported.