SA1
Please refer to the following picture: Length of main and sub box connecting cable: 2.5m RCA to 3.5 input cable: 1.5m
星期六, 六月 7, 2025 在 2:41 PM
(1) Impedance Midwoofer 6Ω Tweeter 6Ω (2) Weight 3D dimension Primary speaker:135.5*155.6*185mm Secondary speaker:About 129*141.6*185mm weight Prima...
星期六, 六月 7, 2025 在 2:41 PM
1.High frequency driver unit 2.Low frequency driver unit 3.Remote control receiving window 4.Signal input button and volume adjustment knob 5.Low ...
星期六, 六月 7, 2025 在 2:42 PM
1. Short press the [INPUT] input key to switch to the corresponding input mode, the indicator will show the corresponding color as follows 2. Use the spe...
星期六, 六月 7, 2025 在 2:44 PM
Input: 100-240V~50/60HZ 2.5A Output: 18V—2.8A 50.4W It is recommended to use the official power adapter included in the accessory.
星期六, 六月 7, 2025 在 2:45 PM
The SA1 comes with two amplifier chips TPA3118. The input sensitivity is mV220@80Hz. So ordinary cell phones and computers can meet the demand with their 3....
星期六, 六月 7, 2025 在 2:45 PM
(1) Whether the SA1 needs to be burned in? Newly purchased speakers are brand-new products. Because they are not used, you will feel that the sound is obvi...
星期六, 六月 7, 2025 在 2:46 PM
a. Bass 3.5-inch wood fiber cone b.Tweeter 3/4 inch aluminum-magnesium alloy dome cone
星期六, 六月 7, 2025 在 2:47 PM
Bluetooth connection Bluetooth input is as default when turning on the speakers for the first time. The RGB light flashing alternately in red and blue mean...
星期六, 六月 7, 2025 在 2:47 PM
1. Please update the FiiO Control App to the latest version (Click the link to get the latest Android version: Click to Download 2. Ensure that the FiiO Co...
星期六, 六月 7, 2025 在 2:48 PM