[Input supported by K11]
K11 supports USB, Coaxial input, Optical input, a total of 3 input methods, by clicking the volume knob to enter the working mode menu for switching working mode.
(The K11 could remember the selected input mode still after restart.)
[Output supported by K11]
USB input mode: supports coaxial out, rear panel line-out, front panel 6.35mm single-ended headphone output and 4.4 balanced headphone output
Optical/Coaxial input mode: supports rear panel line-out, front panel 6.35mm single-ended headphone output and 4.4 balanced headphone output
[Output selection]
PO: Front panel headphone output, adjustable volume
LO: Rear panel line-out, adjustable volume
Note:
1.Quickly switch output: On the homepage, double press the volume knob with physical button to immediately switch between PO and LO.
2.The coaxial output only works in USB mode. In optical/coaxial decoding mode, coaxial outputs no signal.
[Which gain should I use when using headphones]
K11 supports three levels of gain, toggle switch adjustment, respectively L/M/H, the corresponding gain is 0dB/4dB/10dB.
The gain adjustment needs to be determined according to your earphones. It is recommended to use H gain for high impedance headphones, M gain for normal impedance headphones, and L gain for low impedance headphones. After switching the gain, the output power doesn't change, but the volume level will change. It is designed in order to avoid excessive volume/popping noise after gain switching and to improve the listening experience.
Note: Gain is invalid in LO output mode.
这篇文章有帮助吗？
很好！
感谢您的反馈。
抱歉我们没能带来帮助
感谢您的反馈。
反馈已发送
感谢，我们将试着改善此文档。