SA1 automatically standby and wake up

修改于 星期六, 六月 7 在 2:51 PM

1. Standby: The speakers will enter the standby state automatically if there is no input for 20 minutes with RGB light turning to red. After entering the standby state for 20 minutes, the RGB light will be off.

Wake up: It will automatically enter the playback state if there is any input, and the RGB light will restore the color before standby.

Note: The automatic standby wake-up function can be turned off by turning off the power saving mode of FIIO cotrol APP; the default is to turn on the automatic standby.

2. The reason why PHONO input interface cannot enter the auto standby function

PHONO input interface is corresponding to the phono without amplifier, its own input sensitivity is very high, up to the level of mV; a small noise floor will be amplified. This causes the sampling circuit to be in working condition all the time.

这篇文章有帮助吗?

很好!

感谢您的反馈。

抱歉我们没能带来帮助

感谢您的反馈。

告诉我们可以如何改善此文档!

选择至少一个原因
需要进行 CAPTCHA 验证

反馈已发送

感谢,我们将试着改善此文档。