4. How to use the D.MODE (Desktop Mode) and Ultra high gain mode on the M27?

修改于星期二, 十一月 18 在 11:03 AM

1.The definition of Desktop Mode:

When D.mode switched turned on with USB inserted, the desktop mode icon will appear on the M27 screen. At this time, the M27 is powered directly from the USB port, without charging the M27 battery or consuming battery power.

Note:

①If the USB power supply is insufficient, the battery will be required to supply additional power.

②When the battery level is below 15%, inserting USB will forcibly charge the battery even it is in Desktop Mode (charging until the battery is full).

2.How to enable the D.MODE (Desktop Mode) on the M27?

①Insert fast charging to POWER IN or USB 3.0 port

②Switch the D.MODE switch at the bottom of M27 to ON to enable the Desktop mode on M27.

When USB is inserted and D.MODE is displayed ON, it means the Desktop Mode is enabled.

3.The definition of Ultra High Gain mode:

Super High Gain Mode is an option for Gain. When turned on the headphone will have more power and greater voltage swing.

Take 4.4 headphone out as example, the output power of each channel is 2250mW@32Ω in Super high gain mode while output power of each channel is 5000mW@32Ω in Ultra high gain mode.

4.How to enable the Ultra High Gain mode on the M27?

①Make sure the POWER IN/USB3.0 port is connected to a fast charging adapter (The output voltage should be 9V/3A,12V/1.67A or above)that supports PD3.0 or PD2.0.

②Pull down the menu and select Ultra high gain in Gain option. Or select the Ultra high gain option from Settings - Audio - Gain.

Note:When fast charging is plugged in POWER IN port and the Desktop Mode is ON, a prompt will appear asking whether to enable the Super High Gain Mode.