10. How to use the M27 as a Bluetooth receiver?

修改于星期二, 十一月 18 在 11:07 AM

How to Enter Pairing Mode on the M27？

When the M27 enters pairing mode, the screen will display “Waiting for connection…”.

1.The M27 will automatically enter pairing mode the first time you switch to Bluetooth Receiver Mode.

2.Long-press the Play/Pause button to force the M27 into pairing mode.

3.If your M27 is already connected to a phone, disconnecting the Bluetooth connection from the phone will cause the M27 to enter pairing mode.

How to Pair and Connect the M27 to a Bluetooth Source (e.g., Mobile Phone)

1.Go to the drop-down or Settings menu of the M27, and choose the Bluetooth Receiving mode as the working mode.

2.Long-press the Play/Pause button to put the M27 into pairing mode. The screen will display “Waiting for connection…”.

3.On the Bluetooth transmitting list of the mobile phone, tap the M27 to complete the connection.

How to Clear Pairing

Method 1: In Bluetooth Receiving Mode page, go to Settings and tap the “Clear Pairing” option. This will erase all pairing information and the M27 will enter pairing mode, displaying “Waiting for connection…”.

Method 2: Pressing the Next Track button can also erase all pairing information and the M27 will enter pairing mode, displaying “Waiting for connection…”.

Notes

1.The M27 supports auto-reconnect with previously paired devices. Within range, a short press of the Play/Pause button can initiate a reconnection.

2.When connected via Bluetooth, the M27’s buttons support play/pause and track skipping control.

3.Supported Bluetooth Codecs in Bluetooth Receiving mode: SBC, AAC, aptX, aptX Lossless, aptX HD, aptX Adaptive and LDAC.