1.Install the App: Download and install the FiiO Control app from the app store.
2.Network Connection: Please ensure your phone and M27 are connected to the same local network.
3.Enable 'FiiO Cast' on M27: On the M27 device, open the 'FiiO Cast' App and tap Start. (To view the IP address or QR code, tap "Click for more ways to connect".
4.Connect via App:
Open the installed FiiO Control app on your phone.
Tap Add New Device, then select Player from the bottom right.
Search for the M27's IP address and tap to connect.
Alternatively, scan the QR code displayed in Step 3 to establish the connection.
Troubleshooting Guide: M27 Remote Connection Failures
If you experience connection issues after previously successful remote control usage, please follow these steps:
1.Network Connection Check: Verify whether the network connection between your phone and M27 has changed.
2.Background Service Status: Confirm that the remote control background service hasn't been cleared.
3.IP Address Verification: Check if the IP address in FiiO Cast has changed.
4.Advanced Troubleshooting
If the background service is running normally and the IP address remains unchanged but reconnection still fails:
Delete the previously added device from your phone;
Completely close and restart the FiiO Cast on M27;
Re-add the device through FiiO Control app on your phone.
If all above steps fail to resolve the issue, please contact our customer support.
这篇文章有帮助吗？
很好！
感谢您的反馈。
抱歉我们没能带来帮助
感谢您的反馈。
反馈已发送
感谢，我们将试着改善此文档。